EcoWhite EPDM QuickSeam Accessories
Home»Roofing Systems»Accessories»QuickSeam Accessories»EcoWhite EPDM QuickSeam Accessories
Firestone’s tested and proven highly reflective, energy-saving EcoWhite QuickSeam Flashing Accessories are in stock and ready to ship for your next EcoWhite roof installation. Firestone’s QuickSeam products have been hugely successful over the years due to their many benefits, including:
  • Easier and faster installation which can significantly reduce labor costs.
  • Factory installed tape that yields higher quality seams.
  • Reduces VOCs on the jobsite
  • Proven and tested quality and reliability
  
These new accessories can be used with both 60-mil and the new 90-mil EcoWhite Platinum membranes. EcoWhite EPDM PT (60 mil) systems are eligible for a Red Shield Warranty up to 20 years. EcoWhite Platinum (90 mil) EPDM PT membranes, just like all Platinum EPDM membranes, qualify for a 30-year warranty, the best in the industry.

EcoWhite EPDM 6” QuickSeam Flashing
Firestone EcoWhite EPDM 6” (152 mm) QuickSeam Flashing is a semi-cured EPDM flashing laminated to cured QuickSeam tape. EcoWhite EPDM QuickSeam Flashing is used to flash gravel stops and other details as specified in the Firestone Specifications and Details.
EcoWhite EPDM 12” QuickSeam Flashing
Firestone EcoWhite EPDM 12” (304 mm) QuickSeam Flashing consists of semi-cured Flashing factory laminated to cured QuickSeam Tape. It is designed to flash inside and outside corners, pipes, penetration pockets and other applications as required by Firestone Specifications and Details. It is available in 12” (304 mm) wide by 50’ (15.2 m) long rolls.
 

EcoWhite EPDM QuickSeam Pipe Flashing
Firestone EcoWhite EPDM QuickSeam Pipe Flashings are specifically designed to be used in roofing applications for flashing of round penetrations. EcoWhite EPDM QuickSeam Pipe Flashings will fit various penetrations and must be cut to correct pipe diameter before installation.
 

EcoWhite EPDM QuickSeam Splice Tape
Firestone EcoWhite EPDM QuickSeam Splice Tape is designed for field splicing of RubberGard EcoWhite EPDM membrane panels and flashing. It is available in 3” (76.2 mm) and 6” (152.6 mm) widths.
 
EcoWhite EPDM QuickSeam Joint Cover
Firestone EcoWhite EPDM QuickSeam Joint Cover is uncured Flashing laminated to QuickSeam Tape. A second 3” (76.2 mm) diameter layer of uncured, flowing tape is applied at the center. The EcoWhite EPDM QuickSeam Joint Cover conforms to irregular surfaces such as encountered at “T” joints readily providing an excellent seal.

EcoWhite EPDM QuickSeam Joint Covers are designed to cover and seal:
• T- joints formed by field seam intersections.
• T- joints formed by the installation of pre-fabricated pipe flashings over field or factory seams.
• As a protection pad under sheet metal joints for EdgeGard ™ or snap-on metal.
 
EcoWhite EPDM QuickSeam Corner Flashing
Firestone EcoWhite EPDM QuickSeam Corner Flashing consists of Firestone flashing factory laminated to QuickSeam Tape. It is 8.5” (216 mm) in diameter and is designed to flash inside and outside corners in conjunction with EcoWhite EPDM Roof Systems.
  
EcoWhite QuickSeam Curb Flashing
EcoWhite QuickSeam Curb Flashing consists of 18” (457.2 mm) wide 60 gauge non-reinforced EcoWhite membrane with 3” (76.2 mm) wide tape factory laminated along one edge. The 3” (76.2 mm) tape portion is used to splice the EcoWhite QuickSeam Curb Flashing to the roof membrane. The balance of the EcoWhite QuickSeam Curb Flashing is applied to the vertical surface with Firestone Single-Ply LVOC Bonding Adhesive, EPDM Bonding Adhesive BA-2004 (T), or Water-Based Bonding Adhesive S to adhere the membrane in place and terminated using an approved termination detail.
 
EcoWhite QuickSeam Penetration Pocket Kits
EcoWhite QS Penetration Pockets (6” and 10”) are a labor saving option to fabricate penetration pockets. EcoWhite QS Penetration pockets utilize QuickSeam Tape technology and injection molding technology, ensuring uniform product quality and consistency part after part. Each EcoWhite QS Penetration Pocket has EcoWhite QuickSeam Tape factory applied for installation on RubberGard EcoWhite EPDM, UltraPly and ReflexEON TPO membranes.
 
EcoWhite EPDM QuickSeam SA Flashing
EcoWhite EPDM QuickSeam SA Flashing (“EW QS SA Flashing”) consists of 18” (457.2 mm) wide EcoWhite membrane fully and completely factory laminated to EcoWhite seam tape. It can be used to flash curbs and walls in conjunction with EcoWhite roofing systems where allowed by Firestone specifications.

EcoWhite tape is used as the tape adhesive to field splice EW QS SA Flashing to primed RubberGard membrane, as well as the adhesive to bond EW QS SA Flashing to primed vertical substrates. The polymeric release liner (protects the tape until field application) is perforated 6” (152.4 mm) from the tape selvage edge to delineate the lap portion of the EW QS SA Flashing. The perforated release liner allows removal of the liner in separate vertical and horizontal sections.
 
EcoWhite EPDM QuickSeam SA Patch for Conduit Flashing
EcoWhite EPDM QuickSeam SA Patch for Conduit Flashing ("EW QS SA Patch for Conduit Flashing") consists of 18" X 18" EcoWhite membrane fully and completely factory laminated to EcoWhite seam tape with a 3 ¼” diameter hole die-cut in the center. It can be used to flash the flange of QuickSeam Conduit Flashings in conjunction with EcoWhite roofing systems where allowed by Firestone specifications.
 
EcoWhite tape is used as the tape adhesive to field splice EW QS SA Patch for Conduit Flashing to primed flanges of QuickSeam Conduit flashings and EcoWhite membrane. The polymeric release liner (protects the tape until field application) is perforated to allow removal of the liner in separate sections.
 
Recent Bulletins
Marketing Bulletin - New RubberGard EcoWhite EPDM QuickSeam Accessories
Join our Email List!
Bulletins. Announcements.
New Product Introductions. Newsletters. SIGN-UP TODAY
LEGAL NOTICE

User Name:
Company Name:
Company Address:
Email Address:

Legal Message:
Pursuant to the terms set forth below, you ("User") agree to the following:
  1. User will use the content on the following web pages; such content includes, but is not limited to photographs and logos,(collectively herein referred to as the "Materials") provided by Firestone Building Products Company, LLC ("FSBP") in accordance with all of the rules and regulations set forth in this Terms of Use.
  2. User acknowledges that the Materials and any and all rights therein are cooperatively owned by Firestone Building Products Company, LLC and BFS Brands, LLC ("BFS").
  3. User will use the Materials for the intended purpose of marketing and promotions.
  4. User acknowledges that all Materials are used with the permission of BFS.
  5. User agrees that it will make no claim against FSBP and its related entities in connection with the use of the Materials.Further, User will indemnify FSBP and its related entities for any damage FSBP and its related entities incur related to User's use of the Materials and its obligations under this Terms of Use.
  6. User agrees that all rights in the Materials inure to the benefit of BFS.
  7. User agrees that it retains no rights in or to the Materials.
  8. User will not use the Materials outside of their intended purpose as stated in this Terms of Use.
  9. User will in no way disparage, defame, derogate, or otherwise degrade FSBP and its related entities, its products, or the Materials.
  10. User agrees that it is solely responsible for complying with all legal requirements relating to any advertising promotions.
  11. User has read and agrees to abide by all of the rules and regulations set forth in this Terms of Use Any failure to follow said rules and regulations shall require User to immediately cease use of the Materials and, at FSBP's request, either destroy or return any Materials. User shall be liable for any claims and/or damages to FSBP and its related entities.