ULTRAPLY QUICKSEAM REINFORCED MECHANICALLY ATTACHED STRIP
UltraPly QuickSeam Reinforced Mechanically Attached Strip is constructed with Non-Staining White QuickSeam pressure sensitive tape technology and can be installed using conventional UltraPly TPO HD Seam Plates, metal or polymer batten strips. This non-penetration intermediate attachment can be used for roofing membranes up to 12 feet for perimeter installations.
ULTRAPLY QUICKSEAM REINFORCED PERIMETER FASTENING STRIP
Ultraply QuickSeam Reinforced Perimeter Fastening Strip can be simply installed using conventional UltraPly TPO Heavy Duty (HD) Seam Plates. Made from UltraPly TPO membrane and non-staining White QuickSeam pressure sensitive tape, this product is a non-penetrating membrane that offers securement with angle changes in the installation process.
Using pre-applied non-staining QuickSeam pressure sensitive tape technology, this product can be installed with no heat welding and offers ease of application when adding additional pipe penetrations to existing roofs. Molded from UltraPly TPO compound, UltraPly QuickSeam Pipe Boot [SSE1] covers pipes ranging from one inch to six inches in diameter.
ULTRAPLY QUICKSEAM T-JOINT COVERS
UltraPly QuickSeam T-Joint Covers are molded from UltraPly TPO compounds and are pre-applied with Non-Staining QuickSeam pressure sensitive tape that reduces welding time during installation.
ULTRAPLY QUICKSEAM™ PIPEBOOT
Using pre-applied non-staining QuickSeam pressure sensitive tape technology, this product can be installed with no heat welding and offers ease of application when adding additional pipe penetrations to existing roofs. Molded from UltraPly TPO compound, UltraPly QuickSeam Pipe Boot covers pipes ranging from one inch to six inches in diameter.
UltraPly TPO Reinforced Split Pipe Boot
UltraPly TPO Reinforced Split Pipe Boots are factory-fabricated boots made from high performance UltraPly TPO membrane. The boot is specifically designed for flashing round penetrations and will fit various sizes. The split design allows the boot to be used to flash pipe penetrations with limited or no access from above the penetration. The design helps to reduce labor and increases the performacne of the detail and system.
UltraPly TPO 8" Reinforced Cover Strip
UltraPly TPO 8" Reinforced Cover Strip, made from 60-mil UltraPly TPO membrane, can be used for intermediate mechanical attachment and to strip in TPO XR end laps. Pre-cut into 50-foot ready-to-use rolls, this reinforced cover strip can provide faster installation and savings due to reduced labor time.
UltraPly TPO Reinforced Curb Corners
Constructed of 45-mil UltraPly TPO membrane, UltraPly TPO Reinforced Curb Corners have a six-inch flange that help ensure adequate weld area around the perimeter of the curb. This product is available in six sizes to accommodate multiple curb sizes and can allow for faster installation.
FIRESTONE X-TRED™ WALKWAY PAD
Firestone X-Tred™ Walkway Pad is a versatile, easy to install walkway pad made from 100 percent TPO. The pad’s self-ballasting feature and loose-laid design eliminates buckling and the need for heat welding to the roof membrane, increasing ease and speed of installation for roofing contractors.
ULTRAPLY TPO WALKWAY PAD
UltraPly TPO Walkway pad offers a textured cross hatch which allows for visibility and increased slip-resistance. Its scrim reinforcement provides dimensional stability and increased durability. Along with its fully heat-weldable TPO composition, this walkway pad contains recycled materials. The reflective white surface reduces thermal expansion, providing a smooth walking surface.
WHITE ONE-PART POURABLE SEALER
The White One-Part Pourable Sealer is a quick curing, water tight sealant for smaller penetrations such as pitch pockets, roof intrusions and tubing/wiring penetrations. With its re-sealable pouch, the product may be used for up to 30 days after opening, helping to cut down on waste, which could save you money. Optional One-Part Pourable Sealer Nozzle Replacements are also available to aid in pouring precision for tight spaces (20 nozzles per bag, 5 bags per carton).